Boxes and storage
Design boxes, trays, cases, shelves and fitted compartments.
36 guides found
Building a book-shaped box with a living-hinge spine
a book-shaped box with a living-hinge spine and hidden tray
Building a box with hinged doors with the Door Box Generator
a box with two doors that open from the middle, or a single lid that flips up
Building a divided egg-crate tray
a divided tray with interlocking egg-crate dividers
Building a finger-joint box with the Box Generator
custom finger-jointed boxes sized exactly to your project
Building a finger-jointed box with a living-hinge lid
a finger-jointed box with an integrated living-hinge lid
Building a finger-jointed box with a slip-over lid with the Slip Lid Box Generator
a finger-jointed box with a lid that slips over the top, with an optional handle
Building a finger-jointed display case with viewing windows
a finger-jointed case with windows on any side, a slotted shelf and an optional open corner
Building a finger-jointed hobby case
a finger-jointed hobby case with a press-fit lid, dividers, and handles
Building a finger-jointed paint storage rack
a tiered rack of round holes that holds paint bottles upright
Building a finger-jointed pirate treasure chest
a finger-jointed treasure chest with a curved barrel lid
Building a finger-jointed polygon box
a finger-jointed regular-polygon box, from triangle to dodecagon
Building a finger-jointed slatted crate
a press-fit slatted crate with finger joints and carry handles
Building a laser cut birdhouse with the Birdhouse Generator
a finger-jointed nest box sized for the bird you want, with a lift-off gabled roof
Building a laser cut dollhouse with the Dollhouse Generator
a finger-jointed gabled dollhouse in 1:12, 1:24 or 1:48 with slot-in floors and an open back
Building a living-hinge heart box
a living-hinge heart box that curves all the way around
Building a living-hinge rounded box
a living-hinge box with smooth rounded corners
Building a miniature scene with the Coffee Shop Diorama Generator
an open-front diorama room with windows, shelves, and a name plaque
Building a pass-through book and cookbook stand
an angled reading and cookbook stand with a page ledge
Building a round or polygon box with the Round Box Generator
a round or many-sided box built from flat staves, with a lift-off lid
Building a shelf insert with the Book Nook Case Generator
a book-sized display case for miniature dioramas between your books
Building a slanted parts-bin tray
a slanted parts-bin tray divided into scoopable bins
Building a sliding lid box or a matchbox with the Slide Box Generator
a box with a lid that slides out through its rails, or a matchbox tray in a sleeve
Building a sloped sticky-note holder
a sloped desk caddy for memo paper and sticky notes
Building a star-shaped box with a bent wall with the Star Box Generator
a star-shaped box whose wall bends around every point, with a lift-off lid
Building a stepped display riser with the Stairs Display Generator
a stepped riser for shelves and market stalls, with optional risers and a back panel
Building an A-frame desk sign
an A-frame desk sign with engravable faces
Building an angled tiered display shelf
an angled tiered display shelf with anti-slide front rails
Building an open-front stackable parts bin
an open-front stacking parts bin with a slanted lip
Building an organiser box with compartments with the Divider Box Generator
a finger-jointed organiser with rows of compartments and an optional slip-over lid
Cutting a finger-jointed chest of drawers with the Drawer Chest Generator
a small press-fit chest of drawers with finger joints, sized from your sheet thickness
Going bigger than your laser bed with the Joint Panel Generator
interlocking panels that assemble into artwork larger than your laser bed
Making a lit Christmas village house with the Christmas Village House Generator
a laser cut village house with glowing windows, a tealight hole and an optional steeple
Making frames with the Infinity Mirror & Shaker Box Generator
two plates and a spacer: the sandwich frame behind infinity mirrors and shaker fillables
Printing a custom box with the 3D Print Box Generator
hollow boxes with optional lids, engraved text, and rounded corners
Printing a ridged vase with the 3D Print Vase Generator
decorative vases and planters with twisting ridge textures
Printing an organizer with the 3D Print Grid Box Generator
divided organizer boxes with custom rows, columns, and cell sizes
Keep up with MyLaserTools.
Email me about new tools, product updates, tutorials, and occasional MyLaserTools offers. Unsubscribe at any time.
© 2026 MyLaserTools.com. All rights reserved.






































