Making a parks-and-green-space map with the Leisure & Green Map preset

Difficulty: Easy. Time: about 1 to 2 hours of machine and glue time once your file is exported. Best methods, in order: UV print, laser cutting, 3D printing; the soft greens and accent pinks read best in full color, but engraved or layered wood works beautifully too.

This preset celebrates the parts of a city people actually relax in: parks, theme parks, zoos and playgrounds, all rendered as solid filled shapes over water and a soft mint-green backplate. It opens over the Greater Manchester area at zoom 11, a region threaded with parks and country estates, which shows off the leisure-green palette at its best.

There are no roads or buildings here: just water and green space as clean filled areas. That gives the design a calm, poster-like quality and makes it one of the easiest map projects to produce: no hair-thin geometry, no loose street fragments, just bold blocks of color. It's a natural gift for park lovers, a family that lives near a famous green space, or a city known for its gardens.

Example of Leisure & Green Map
On this page (6)
  1. 1. Start from the preset
  2. 2. Tune the layers
  3. 3. Export
  4. Laser Cutting & Engraving
  5. 3D Printing
  6. UV & Sublimation Printing

What you need

Laser cutting

  • 3 mm laser-grade plywood or MDF for the green-space plate (1 sheet)
  • 3 mm acrylic or painted ply in soft green for the backplate (or paint it after cutting)
  • Any diode or CO2 laser that fits your target size (200×200 mm and up works well)
  • Wood glue or CA glue, clamps or weights, sandpaper (220 grit)

3D printing

  • Any FDM printer; PLA in 3 to 4 colors (mint, leaf green, dark green water, pink accent) or a single color
  • Slicer that accepts 3MF (Bambu Studio, PrusaSlicer, OrcaSlicer)

UV print / sublimation

  • The exported high-res PNG
  • UV flatbed printer or sublimation setup with a hardboard/aluminum blank

1. Start from the preset

Open the Leisure & Green Map preset, search for your city, and pan until its biggest parks sit in the middle. The preset opens over the Manchester region at zoom 11, a wide view that gathers many parks and a stretch of water into one frame. Stay near zoom 11 for a city-region of green spaces; zoom in to 12 to 13 to feature a single large park or estate in detail.

Screenshot of the Leisure & Green Map: 1. Start from the preset

2. Tune the layers

The preset has two layer groups. The top group, Green & water, holds five filled features, all Solid mode:

  • Water: solid fill, deep green #2d6a4f. Rivers, lakes and reservoirs, tinted green rather than blue to sit inside the leisure-green palette. Frame your view so some water appears.
  • Park: solid fill, leaf green #52b788. The main event: public parks, gardens and recreation grounds. Usually the dominant area on the map.
  • Theme park: solid fill, pink #e76f9e. The brightest accent color: theme and amusement parks pop against the greens.
  • Zoo: solid fill, warm brown #c08552. Zoos and wildlife parks.
  • Playground: solid fill, soft yellow #f2cc8f. Smaller play areas; sprinkles warm accents through the green.
  • Backplate: solid base plate, soft mint #b7e4c7. Change this color to match your acrylic or paint.

Toggle off any feature your area doesn't have. A two-tone version (just Park over the mint backplate, with Water) is the cleanest, calmest look; keep the pink Theme park and yellow Playground accents on if you want the design livelier.

3. Export

  • Laser: export the per-layer SVG ZIP; one file per layer. Cut the backplate, then either cut the green-space shapes from contrasting sheets or engrave them as filled areas onto a single plate (engraving keeps small playgrounds from becoming loose fragments). Turn on small-polygon cleanup to drop slivers that would burn away anyway.
  • 3D printing: export 3MF for a multicolor stack, or STL for single color.
  • UV print: export the high-res PNG (4096 px). Keep the Background toggle on so the mint plate prints as a solid color, or turn it off for a transparent-background print on a colored substrate.
Screenshot of the Leisure & Green Map: 3. Export

Choose your build method

Laser Cutting & Engraving

Laser cutting

All filled areas means two good routes: a layered stack of cut shapes, or a single engraved plate. Engraving is the easier option for the smaller playground and zoo patches.

  1. Cut the Backplate from your soft-green material first: it's the registration reference for everything else.
  2. Engrave route: engrave Water, Park and the accent layers directly onto the backplate (or a single ply plate) as filled fills, varying engrave power per layer for tonal contrast. No assembly, no loose pieces.
  3. Layered route: cut each green-space layer from its own contrasting sheet (a deeper green for parks, a pink acrylic for theme parks). Use masking tape over the sheet before cutting so the smaller patches stay put.
  4. Glue bottom-up: backplate → water plate → park → zoo/theme park/playground accents. Thin, even glue; weight it flat for 30 minutes, or skip the squeeze-out entirely with 3M tape: 467 or 468 transfer tape for acrylic, 300LSE for harder materials.
  5. Sand the edges flush, finish with oil or clear spray.

3D Printing

3D printing

  1. Export the 3MF and open it in your slicer: layers arrive pre-stacked with their colors (mint backplate, dark green water, leaf-green parks, pink theme parks). With an STL you'll slice in one color.
  2. Print flat on the bed, no supports needed. 0.2 mm layer height is plenty; the solid park blocks print cleanly with no thin features to drop out.
  3. Scale: 150 mm wide and up works well. With no thin roads to worry about, this design holds up at smaller sizes than a street map would.

UV & Sublimation Printing

UV print / sublimation

  1. Export the high-res PNG. Background on = full-color artwork on the mint plate; background off = transparent PNG so your substrate color becomes the base.
  2. Print onto hardboard, slate, or aluminum; for sublimation, mirror the image and press per your blank's specs. The soft greens and bright accent pinks reproduce especially well in full color: print is arguably this preset's best method.

Next steps and project ideas

  • Park-rich cities shine here: Manchester, London, Minneapolis, Portland, Munich; anywhere green space dominates the map.
  • Swap the backplate to a deeper sage #74a892 for a more grown-up palette, or keep the soft mint #b7e4c7 for a fresh, modern look.
  • Make a single-park feature piece: zoom in to one estate or country park and turn off the other layers for a focused gift.
  • Recolor Park to autumn tones (warm orange/brown) for a seasonal version of the same city.
  • Engrave the park's name or a coordinates line onto the backplate before assembly.
  • Use the Hanger hole ring mounting option and cut at ornament size (~90 mm) for a tree or window decoration, or add a snap clip and call it a keychain.
  • Increase the global border padding for a chunkier frame around the whole plate.

Take the design into your software

Was this guide helpful?