Stairs Display Generator

A tiered display riser with stepped side panels and tabbed treads, risers and back, for showing collections at different heights on one shelf.

Settings

Units

Steps

Number of steps
How much each step rises above the one in front.
mm
Front to back depth of each step.
mm
Width between the two side panels.
mm

Panels

Risers
Vertical boards under each step. Turn off for an open, lighter stand.
Back panel
Closes the back and stiffens the stand.
How far the back panel rises above the top step.
mm

Construction

mm

Vector Export

3D Print Design

The STL and 3MF are ready to print: the whole display is one solid stepped piece standing on its base.

3MF preserves richer print metadata when your slicer supports it.

Inspirational Palette
581mm × 805mm
(22.9in × 31.7in)

Examples

Four steps cut from TruFlat black plywood. Each tread, each riser and the back board tab through closed slots in the stepped side panels.

Black four step display riser cut on a laser, with a raised back board

Material used:

Set the material thickness to match your sheet before cutting, since every tab and slot is sized from it.

How To Use

Frequently Asked Questions

Tiered displays for collections and shops: figures, perfume, succulents, cupcakes, nail polish or product samples at different heights on one shelf.

Every tread, riser and the back have tabs that pass through slots in both side panels. A dot of glue at each tab locks the stand square.

Yes. Turn off the risers, and the back panel too if you like. The treads are then held only by their tabs in the side panels, so keep the step depth moderate for heavy items.

Visit the MyLaserTools Learning Center for a step-by-step Stairs Display Generator guide, plus material tips and file-format help for laser cutting, CNC, and 3D printing. The guides walk you through every setting and how to prepare your files for your machine.

Open the Stairs Display Generator guide

About

This free stairs display generator builds a tiered riser like a small stadium: two stepped side panels with slots, treads and risers whose tabs lock through those slots, and an optional back panel with a crest above the top step. The side panels frame every board, so the riser stays square and looks finished from the side. Use it to display figures, perfume, succulents, cupcakes, nail polish or shop samples at different heights on one shelf.