Round Box Generator

A round or polygon box with a lift-off lid, built from flat staves that drop into a slotted base and rim, so it cuts on any flat-bed laser.

Settings

Units

Size

Shape
mm
mm
Staves
More staves make a rounder wall.

16 staves, 23.7mm wide. Outside diameter 140.5mm.

Lid

Lift-off lid
A lid plate with a plug underneath that drops into the rim opening.
Gap around the plug so the lid lifts off easily.
mm

Construction

mm
How far the base and the rim ring stick out past the wall.
mm

Vector Export

3D Print Design

The STL and 3MF are ready to print: the box is one solid piece, with a solid wall in place of the staves, and the lid with its plug is a second piece.

3MF preserves richer print metadata when your slicer supports it.

Inspirational Palette
287mm × 431mm
(11.3in × 17.0in)

Examples

Cut from walnut plywood. The staves stand in the base slots, the slotted rim ring locks their tops, and the plug under the lid drops into the rim opening.

Round laser cut box in walnut plywood with its lift-off lid

Material used:

Set the material thickness to match your sheet before cutting, since every tab and slot is sized from it.

How To Use

Frequently Asked Questions

Yes. The wall is made of flat staves, each with a tab at the top and the bottom. The tabs drop into slots in the base and the rim ring, so nothing has to bend.

16 staves already look round on a 120 mm box. Use more for larger boxes and fewer for a faceted look or fewer parts. The slider stops where a stave would get too narrow to hold its tab.

A plug glued under the lid drops into the rim opening and keeps the lid centred. Raise the lid clearance if it binds, lower it for a snugger fit.

Visit the MyLaserTools Learning Center for a step-by-step Round Box Generator guide, plus material tips and file-format help for laser cutting, CNC, and 3D printing. The guides walk you through every setting and how to prepare your files for your machine.

Open the Round Box Generator guide

About

This free round box generator turns a round or polygon box into flat parts: a slotted base, straight staves with a tab at each end, a slotted rim ring and an optional lift-off lid. The staves stand in the base slots and the rim ring locks their tops, so the wall holds its shape with very little glue. It cuts on any flat-bed laser without a rotary attachment and suits gift boxes, planters, hat boxes and candle holders.