Pen Topper Generator

Type a name, pick what it goes on and print a topper that grips it. Hex pencils get a hex hole, markers get a collar, straws and cords go straight through. Raised letters print in a second colour, and a list of names comes out as one plate.

Loading...

How To Use

1

Type a name. For a set, put one name per line, up to 100. The preview shows the first one and the download holds them all.

2

Choose what it fits on. Each preset sets the hole size, shape and mount. Measure your own barrel with calipers and enter it if it is not listed: across the flats for a hex pencil, across the round for everything else.

3

Pick the grip. Snug is for pencils you never take the topper off, loose suits soft filament or a shaky first print. If in doubt, print one and adjust.

4

Download the 3MF to keep the colours as separate parts, or the STL for one colour. Print it flat with the letters up. On a single-colour printer, pause at the height shown and swap filament for the letters.

Need deeper setup tips? Visit the MyLaserTools Learning Center.

Frequently Asked Questions

Yes. The Pen Topper Generator is 100% free with no limits, no watermarks, and no trial period. Generate and download as many files as you want, free forever.

Free name toppers for pencils, pens, markers and straws, with a hole sized to the barrel. Print a whole class set as one multicolour 3MF. Adjust the settings, preview your design in real time, and download a ready-to-make file in seconds.

It exports STL files for 3D printing, and multi-colour 3MF files where multiple parts or colours are involved. Files are generated instantly in your browser.

3D printers via slicers such as Bambu Studio, PrusaSlicer, OrcaSlicer, and Cura, with 3MF files carrying colour data for multi-colour prints.

You can use PLA, PETG, ABS, TPU, and any filament your printer supports for 3D printing. The generated files are standard formats compatible with any material your machine can handle.

No account or sign-up is required for the Pen Topper Generator. It runs entirely in your browser, your designs never leave your device, and there is nothing to install.

Yes. A commercial license is included, so you can sell products made with the Pen Topper Generator on Etsy, Amazon Handmade, Shopify, at craft fairs, or anywhere else. Attribution is appreciated but not required.

Visit the MyLaserTools Learning Center for a step-by-step Pen Topper Generator guide, plus material tips and file-format help for laser cutting, CNC, and 3D printing. The guides walk you through every setting and how to prepare your files for your machine.

Open the Pen Topper Generator guide

About

The pen topper generator turns a name into a small 3D print that pushes onto the end of a pencil, pen, stylus, marker, drinking straw or cord. The hole runs along the plate so the topper prints flat on the bed without supports, and its size comes from the barrel you pick plus a little clearance for the grip you want.

There are three ways to mount it. Inside hides the socket in a solid stem under the name. Through runs the hole the full height, so a straw or cord passes right through. Collar adds a round sleeve for thick markers. Paste a list of names and the download lays every topper out on one plate, which is handy for a classroom or a party.