Pegboard Organizer

Pegboard organizer: a wall board with staggered rows of slots, standing off the wall on spacer strips, and accessories that hook into any slot: hooks, a tool…

Settings

Units

Board

Columns
Slot columns
Rows
Slot rows
Pitch
Distance between slots in a row, and between rows
Slot length
Slot length

Accessories

Hooks
Hooks to hang on the board
Hook reach
Reach of the hooks
Shelf depth
Depth of the shelf and the bin

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm
Clearance

3D Preview

Building your model
Inspirational Palette

Code

Photos

Pegboard Organizer

About this design

Laser cut & 3D print

Pegboard organizer: a wall board with staggered rows of slots, standing off the wall on spacer strips, and accessories that hook into any slot: hooks, a tool shelf with holes for screwdrivers and a bin. Each one has a neck that passes through a slot and a finger that drops behind the board, and leans on the board's face below. Assembly: glue the spacers behind the board and screw it to the wall through the corner holes. Glue the shelf and the bin together. Tip an accessory in, finger first, and let it drop.

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs