
Sticky Note Caddy
Sticky note caddy: a desk block built up in layers, with a well for each pad of sticky notes and a taller tower of pen holes at the end. The wells are sized…
Settings
Switch to Batch to make the same design for a list of names.
Caddy
Material
3D Preview
Photos

About this design
Laser cut & 3D print
Sticky note caddy: a desk block built up in layers, with a well for each pad of sticky notes and a taller tower of pen holes at the end. The wells are sized to your pads, with a dip at the front to lift the last sheets out, and the layers step up where the pens need depth. Your name is engraved on the top. Assembly: glue the layers in order, base first, lining up the edges.
Personal useCommercial use
How to make it
- 1Change the settings. The preview updates after each change.
- 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
- 3Like the design and add a photo of what you made below.
Questions
Yes. It is free to download and use under its licence.
Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.
An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.
The size follows the settings on this page, and the size box under the preview shows the result.
Set the material thickness to the sheet you cut. The slots and tabs follow it.
Yes. The licence covers personal and commercial use of the pieces you make.
Made by the community
Cut this one? Share a photo and a note about how it went and get 10 sparks right away.









