Grand Piano Music Box

Grand piano music box: a little grand piano that holds a wind-up music box movement. The case is a stack of frames cut to the piano's curve, the keyboard has…

Settings

Switch to Batch to make the same design for a list of names.

Units

Piano

Length
Length of the case, keyboard to tail
Depth
Height of the case sides
Title
Name above the keys

Music box movement

Movement X
Movement size, across and front to back
Movement Y
Movement height
Movement height

Assembled view

Lid angle
Lid opening angle

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm
Clearance

3D Preview

Building your model
Inspirational Palette

Code

Photos

Grand Piano Music Box

About this design

Laser cut & 3D print

Grand piano music box: a little grand piano that holds a wind-up music box movement. The case is a stack of frames cut to the piano's curve, the keyboard has raised black keys, and the lid lifts on its prop stick to let the tune out. The legs are crossed pairs that plug into the floor. Assembly: glue the frames in a stack on the floor and the cheeks, keys and name board at the front. Screw the movement to the floor with its key through the hole. Slot each pair of leg plates together and plug them in. Glue the two lid layers together, so the hinge screws have wood to bite, and hinge the lid alo

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs