Galileo's Escapement

Galileo's escapement: a working model of the pendulum clock Galileo designed in 1641, from the drawing his pupil Viviani made of it. A falling weight turns…

Settings

Units

Clock

Pendulum
Pendulum length, pivot to the middle of the bob

Assembled view

Tick
Time through one turn of the wheel, 0 to 1: six beats

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm
Pin
Arbor and pin diameter

3D Preview

Building your model
Inspirational Palette

Code

Photos

Galileo's Escapement

About this design

Laser cut & 3D print

Galileo's escapement: a working model of the pendulum clock Galileo designed in 1641, from the drawing his pupil Viviani made of it. A falling weight turns the pin wheel; a pallet on the pendulum stops the next pin, and each swing lifts the pallet to let the wheel turn one pin on, the pin giving the pallet a push to keep it swinging. The pendulum's lyre opens round the wheel's arbor, and a hand on the arbor counts the beats. Assembly: glue the upright and the brace into the base. Glue the pins into the wheel and the drum discs onto the arbor behind the upright; the arbor turns freely in the up

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs