Business card pocket

Card pocket: an open-top card tray with a scooped front and a taller back. Interior width and depth follow the cards and stack, with editable ease. Assembly…

Settings

Units

Cards

Card width
Stack depth
Back height
Front height
Ease

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm

3D Preview

Building your model
Inspirational Palette

Code

Photos

Business card pocket

About this design

Laser cut & 3D print

Card pocket: an open-top card tray with a scooped front and a taller back. Interior width and depth follow the cards and stack, with editable ease. Assembly: glue the five finger-jointed panels. Cards are not supplied.

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs