
House Number Sign
House number: a modern address sign with the numbers cut as separate pieces that stand off the board on hidden spacers, slightly smaller copies of each…
Settings
Switch to Batch to make the same design for a list of names.
Sign
Material
3D Preview
Photos

About this design
Laser cut & 3D print
House number: a modern address sign with the numbers cut as separate pieces that stand off the board on hidden spacers, slightly smaller copies of each number, so they cast a shadow, and the street name engraved underneath. The board is sized to the number, in a row or stacked, with screw holes at the corners. Cut it from exterior plywood and seal every face and edge with outdoor varnish. Assembly: glue each number's spacer layers together and onto the back of the number, then onto the board. Screw the board to the wall.
Personal useCommercial use
How to make it
- 1Change the settings. The preview updates after each change.
- 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
- 3Like the design and add a photo of what you made below.
Questions
Yes. It is free to download and use under its licence.
Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.
An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.
The size follows the settings on this page, and the size box under the preview shows the result.
Set the material thickness to the sheet you cut. The slots and tabs follow it.
Yes. The licence covers personal and commercial use of the pieces you make.
Made by the community
Cut this one? Share a photo and a note about how it went and get 10 sparks right away.









