Leonardo's Polyhedra

Polyhedra: the solids Leonardo drew for Luca Pacioli's book On Divine Proportion, built from flat faces. Hollow, each face is a frame, so you see through to…

Settings

Units

Solid

Solid
The solid
Size
Diameter across the corners
Style
Hollow frames or solid faces
Frame
Width of the frames

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm

3D Preview

Building your model
Inspirational Palette

Code

Photos

Leonardo's Polyhedra

About this design

Laser cut & 3D print

Polyhedra: the solids Leonardo drew for Luca Pacioli's book On Divine Proportion, built from flat faces. Hollow, each face is a frame, so you see through to the faces behind, as in Leonardo's drawings of the vacuus solids; solid, the faces are plain. Pick a regular solid, a cut one (abscisus) or the raised octahedron with a pyramid on every face (elevatus). Each face's edges are set back just enough for its neighbours, so the faces meet along their inside edges at any size and thickness. Assembly: glue the faces edge to edge around a vertex, then work round. Masking tape on the outside holds t

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs