Captive sliding tile puzzle

Slide grid: a solvably shuffled sliding puzzle with a removable clear retainer. Circular finger ports let tiles slide beneath the cover while keeping them in…

Settings

Units

Puzzle

Columns
Rows
Tile size
Shuffle steps
Seed
Numbers

Assembled view

Tile slide
Slide one adjacent tile into the blank, and back, without changing the cut.

Fit

Slide gap
Vertical play
Cover thickness
Bolt diameter

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm

3D Preview

Building your model
Inspirational Palette

Code

Photos

Captive sliding tile puzzle

About this design

Laser cut & 3D print

Slide grid: a solvably shuffled sliding puzzle with a removable clear retainer. Circular finger ports let tiles slide beneath the cover while keeping them in. Assembly: glue the plywood spacer to the floor. Add tiles, then bolt the acrylic cover on with thin washers for vertical play. Undo it to change tiles.

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs