Hanging Shop Sign

Shop sign: a hanging sign on a bracket that stands out from the wall, like an old inn or a corner shop, for a door, a stall or a bedroom. The board is two…

Settings

Switch to Batch to make the same design for a list of names.

Units

Sign

Name
Name on the board
Subtitle
Smaller line under it
Width
Width of the board
Height
Height of the board
Shape
Shape of the board

Material

Material thickness
The sheet you cut. Slots and tabs follow it.
mm
Kerf
Width of material the laser burns away.
mm
Clearance
Hook
Hook wire diameter

3D Preview

Building your model
Inspirational Palette

Code

Photos

Hanging Shop Sign

About this design

Laser cut & 3D print

Shop sign: a hanging sign on a bracket that stands out from the wall, like an old inn or a corner shop, for a door, a stall or a bedroom. The board is two layers back to back so the name reads from both directions, with an engraved border that follows the shape. The bracket is sized to the board, with a ring in its corner, and tabs lock it into the wall plate. Assembly: glue the board layers back to back and the bracket into the wall plate. Screw the plate to the wall and hang the board on hooks.

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs