Ascent marble lift

Ascent: a hand-cranked marble lift. Turn the crank clockwise and a pocket in the laminated wheel carries one marble up the left side, over the top and down to…

Settings

Units

Mechanism

Marble diameter
Measured diameter of the marble; sets the pockets and the wheel thickness
Wheel radius
Radius of the pocket wheel
Pockets
Number of pockets round the wheel

Material

Material thickness
Sheet thickness
mm
Kerf
Beam width
mm

Assembly

Crank angle
Crank angle in the assembled view, clockwise seen from the front

Export

Output
All parts, or one group at a time

3D Preview

Building your model
Inspirational Palette

Code

Photos

Ascent marble lift

About this design

Laser cut & 3D print

Ascent: a hand-cranked marble lift. Turn the crank clockwise and a pocket in the laminated wheel carries one marble up the left side, over the top and down to an opening in the shroud on the right, where it drops out and rolls down a sloping chute into a covered catch box.

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs