Peck pecking hens

Peck: the folk toy of hens pecking grain on a round paddle. Each hen's head rocks on a bolt through her body, and a string from her neck runs down through the…

Settings

Units

Toy

Hens
Number of hens round the paddle
Paddle diameter
Diameter of the round paddle in mm; the hens stand at the same distance from its rim
mm

Fit

Neck clearance
Added to the M3 bolt for the hole each head rocks on

Assembly

Swing
the hen nearest it pecks and the weight swings out the other way
Swing reach
How far the weight swings out, in mm
mm

Export

Output
All parts, or one group at a time

Material

Material thickness
Sheet thickness
mm
Kerf
Beam width
mm

3D Preview

Building your model
Inspirational Palette

Code

Photos

Peck pecking hens

About this design

Laser cut & 3D print

Peck: the folk toy of hens pecking grain on a round paddle. Each hen's head rocks on a bolt through her body, and a string from her neck runs down through the paddle to a weight hanging below. Hold the handle and swing the paddle in small circles: the weight swings round, pulls each string in turn and the hens peck one after another, their tails bobbing up behind.

Personal useCommercial use

How to make it

  1. 1Change the settings. The preview updates after each change.
  2. 2Download the SVG for your laser, or open it in the Design Editor to add more to it.
  3. 3Like the design and add a photo of what you made below.

Questions

Yes. It is free to download and use under its licence.

Yes. Change the settings on this page and the preview updates as you go. When it looks right, download the file.

An SVG for your laser software. You can also open it in the Design Editor, or download STL and 3MF at the material thickness to print the parts.

The size follows the settings on this page, and the size box under the preview shows the result.

Set the material thickness to the sheet you cut. The slots and tabs follow it.

Yes. The licence covers personal and commercial use of the pieces you make.

Made by the community

Cut this one? Share a photo and a note about how it went and get 10 sparks right away.

I made this

More from Kerf Designs

Similar designs