# Fast vector engraving with the Single Line Text Generator

> true single-stroke fonts for lightning-fast engraving

Normal fonts are outlines: engrave the word "Congratulations" and the laser rasters back and forth filling shapes for minutes. Single-line fonts are different; each letter is a single stroke path, so the laser scores it in one continuous motion, like handwriting with light. A name that rasters in four minutes scores in four seconds.

This is the tool for batch personalization: names on cutting boards, dates on ornaments, serials on jigs, hundreds of place cards at a wedding. The export is a clean open-path SVG meant for your laser's line/score mode.

## What you need

- **Laser engraving:** any laser cutter with a vector score mode, plus whatever you are personalizing: [laser-grade plywood](https://yxecreations.com/collections/laser-grade-plywood) blanks, [leatherette](https://yxecreations.com/pages/leatherette) patches, anodized aluminum, coated tumblers (rotary), or finished goods

## Step 1 - Type your text



Open the tool and enter your wording in **Your Text**. The **Font** list contains true single-stroke faces, from neat engineering lettering to flowing script; every one renders as open paths with no fill.

## Step 2 - Size it



- **Height** sets the capital height in real units; use the **Units** toggle to match your measurements.
- **Letter Spacing** opens up or tightens the line. Scored text has no stroke weight of its own, so slightly generous spacing keeps small sizes legible.
- Single-line text stays readable far smaller than filled text; 3 mm tall names on jewelry blanks are perfectly practical.

## Step 3 - Export



Download the **SVG**. Because the paths are open strokes, set them to **line/score mode** in your laser software, never cut mode and never raster fill.

## Step 4 - Make a whole batch at once



Engraving the same label for a whole list? Use the **Single / Batch** toggle above the text field, switch to **Batch**, and type one line per item or upload a .txt file. The preview tiles every design so you can check the set, and one SVG download lays them all out on a single sheet, ready to engrave in one job. Remember to keep them on line/score mode.

## Laser Engraving

### Scoring the text



1. Import the SVG; if your software asks, do not close or join the paths.
2. Assign the layer to vector score: low power, high speed. On 3 mm plywood, start around 10 to 15 percent power at high speed and test on scrap.
3. For darker lines on wood, slow down rather than adding power; deep scores look thin, slow scores look ink-like.
4. On leatherette and anodized metal, a single light pass gives a crisp mark with zero cleanup.
5. Batch it: duplicate the design across the bed and run dozens of personalized pieces in one job.

The same SVG also drives pen plotters, CNC drag engravers, and diamond-tip rotary machines; anything that follows a line loves single-stroke text.

## Make it yours

- Engrave guest names on wood place cards; a full wedding seating set scores in minutes.
- Add names and dates to the backs of ornaments and keepsakes you have already cut.
- Personalize leatherette patches before sewing them onto beanies and bags.
- Mark tool cribs and jigs with sizes and labels that never rub off.
- Score a recipe in handwriting-style script onto a cutting board.
- Use a pen plotter with the same SVG for hand-written-look envelopes and cards.
- Engrave serial numbers or batch dates on products without slowing production.
- Pair with any cut file from other tools: cut the shape first, then score the personalization.

---

Open the Single Line Text Generator: https://www.mylasertools.com/single-line-text
Read online: https://www.mylasertools.com/learn/guides/single-line-text