# Making a blueprint panel with the Blueprint Map preset

> white linework on blueprint blue, drafting-room style

This preset redraws a city as an architect's blueprint: fine white linework on deep blueprint blue, with water and parks as barely-darker and barely-lighter shades of the same blue. It's built for UV printing on acrylic and metal, where the fine width-1 streets stay razor sharp. The result looks like a drafting-room artifact - perfect for engineers, architects, new-home gifts, and offices.

## What you need

- **UV printing:** flatbed UV printer, white or clear [acrylic](https://yxecreations.com/pages/acrylic-sheets), brushed or white aluminum composite panel; blue acrylic if you want to print lines-only
- **Sublimation:** sublimation printer + paper, white gloss poly-coated aluminum panel (gloss metal sells the blueprint look), heat press, heat tape, butcher paper
- **Laser engraving:** laser plus blue- or black-anodized aluminum, or blue-over-white two-tone acrylic - reveal materials reproduce white-on-blue directly
- **3D printing:** multi-color printer, deep blue + white filament; plan to thicken the lines first

## Step 1 - Start from the preset



Open [the Blueprint Map preset](/map-designer?preset=blueprint-map). It loads Chicago at zoom 13.2 - the scale where the full street hierarchy shows and the grid reads as drafting linework. The aesthetic rewards **gridded cities**: Chicago, Barcelona, Portland, Toronto. Search your city and frame so a strong axis (lakefront, river, main boulevard) runs through the square; blueprint compositions like a straight datum line. Stay near zoom 13–13.5 - this preset needs the width-1 street mesh to fill space, so don't zoom out past ~12.7 or the fine grid muddies.

## Step 2 - Tune the layers



One Solid layer group, **Blueprint**:

- `land` - `#0B3D91` the blueprint blue.
- `water` - `#0A2F70` a step darker; Lake Michigan reads as a deep field.
- `landusePark` - `#10489F` a step lighter, ghosting in the green spaces without breaking monochrome.
- Linework: `roadsMotorway` `#FFFFFF` width 2, `roadsPrimary` `#FFFFFF` width 1.5, `roadsSecondary` `#DCE7F7` width 1, `roadsStreet` `#C3D4EF` width 1.

The whole point is fine, even linework - resist the urge to thicken for print methods that hold detail (UV). For sublimation, where ink gas spreads, the width-1 `#C3D4EF` streets will soften and slightly blur into the blue; bump them to width 1.5 and `#DCE7F7` if your presses run hot. Note `water` vs `land` is a subtle 1-step difference by design - if your composition depends on the water (coastal cities), deepen water to `#082757` so it survives every method.

## Step 3 - Export



- **UV / sublimation:** 4096 px PNG, background ON for white substrates. On blue acrylic or blue-coated metal, toggle **Background off** (and hide `water`/`landusePark`) for a transparent PNG of pure linework - the substrate becomes the blueprint.
- **Laser:** per-layer SVG ZIP, lines only (Background off).
- **3D:** 3MF, after thickening lines (below).
- **Corner holes** are the natural Mounting holes choice - standoff-mounted on acrylic with [anodized standoff spacers](https://yxecreations.com/products/4-pack-anodized-standoff-spacers), it reads exactly like a framed drawing set. The **compass icon** overlay suits the drafting theme if you have an empty corner of lake or park.

## UV & Sublimation Printing

### UV printing



1. Export the PNG - full art for white substrates, transparent lines-only for blue ones.
2. In the RIP, size to panel. The fine linework is why UV ranks first: width-1 streets at 4096 px stay crisp even at 400+ mm panels.
3. On clear acrylic: white underbase, then color - backlit, it glows like a light table.
4. Register, print, optional matte varnish (blueprints are matte artifacts).

### Sublimation



1. Print **mirrored** at final size; consider the width/color bump for streets from Step 2.
2. Tape face-down to a white gloss aluminum panel.
3. Press with the settings recommended for your material, paper, and inks, with butcher paper protection.
4. Peel hot. The deep `#0B3D91` floods rich on gloss metal; whites are no-ink zones revealing the panel. A slight softening of the finest streets is normal - it reads as aged diazo print, which suits the theme.

## Laser Cutting & Engraving

### Laser engraving



Don't raster the blue field on raw wood - burning 90% of the panel is slow and the result isn't blue. Use reveal materials:

1. Export per-layer SVGs with **Background off** - road linework only.
2. On blue- or black-anodized aluminum, engrave all four road tiers; the laser strips the coating to bright metal and you get literal white-on-blue linework.
3. Run motorways at a touch more power than streets for tonal hierarchy.
4. Two-tone blue-cap acrylic works identically: engrave through the blue to the white core, then cut the rectangle and corner holes.

## 3D Printing

### 3D printing



1. Before exporting the 3MF, thicken the linework: streets and secondaries to width 2, primaries 2.5, motorways 3 - width-1 ribbons slice below a single extrusion at plaque scale and vanish.
2. Hide `landusePark` (one step of blue won't read in filament; it just costs a swap) - water can stay if you have a third blue.
3. Slice with deep blue base + white lines; 0.12 mm layers keep junction details sharp.
4. Print 180–220 mm; the raised white grid over blue looks like an embossed drafting plate.

## Make it yours

- Grid cities are king: Barcelona's Eixample, Manhattan, Portland's tiny blocks, Savannah, Kyoto's ancient grid.
- Inverse blueprint: land `#F2F5FA`, all lines `#0B3D91` - blue-on-white drafting paper, and the variant that raster-engraves perfectly on raw wood.
- Blackprint: land `#101010`, lines `#E8E8E8` for a modern architectural dark mode.
- Sepia survey: land `#3B2F23`, lines `#E8D9B8` - Victorian engineering drawing.
- Print on clear acrylic and mount over an LED panel for a working "light table" piece.
- Add a **route layer** in drafting red `#D7263D` marking the route to a new house - perfect closing gift from a realtor.
- Heart export shape over the city where you bought your first home, same palette.
- Pair with the Figure Ground preset of the same district - plan and massing, side by side like a real drawing set.

---

Open the tool: https://www.mylasertools.com/learn/guides/blueprint-map
Read online: https://www.mylasertools.com/learn/guides/blueprint-map