# Making laser-cut earrings with the Earrings Generator

> statement earrings in arches, drops, and clouds with optional patterns

Earring blanks live or die on symmetry and hole placement, and this tool nails both for you. Pick an **Earring Shape** - circle, drop, arch up, arch down, cutout arch, half circle, square, octagon, cloud, leaves and more - then optionally fill it with an engraved **Pattern** like Leaf Veins, Palm Leaves, Wood Grain, Organic Flow, or Ripple Waves. Top and bottom **Jump Ring Holes** are positioned on the shape's axis, so dangles hang straight every time.

## What you need

- **Laser cutting:** 2-3 mm [acrylic](https://yxecreations.com/pages/acrylic-sheets) - glitter, marble, and frosted sheets are earring royalty - or 3 mm [laser-grade plywood](https://yxecreations.com/collections/laser-grade-plywood) for boho wood pairs
- **3D printing:** any FDM printer; lightweight PLA pairs are comfortable even at large sizes
- **Findings:** earring hooks or studs, jump rings, two pairs of pliers

## Step 1 - Shape and pattern



Choose the shape and set the **Diameter** - 25-40 mm is the comfortable dangle range. Add a pattern if you want texture; patterns export as engrave paths inside the cut outline, so they cost nothing structurally. **Outline Thickness** thickens the frame on cutout styles like the Cutout Arch.

## Step 2 - Holes



- Turn on the **Top Hole** for the hook connection and size it with **Jump Ring Hole Size** - 1.5-2 mm suits standard jump rings.
- Enable the **Bottom Hole** too if you plan two-tier dangles; chaining an arch over a drop is the classic combo.
- Keep at least 1.5 mm of material around each hole or acrylic will crack at the pliers stage.

## Step 3 - Export



Download **SVG** for the laser, or **STL/3MF** at 1.5-2.5 mm thickness for printing. Cut or print everything in pairs - the file is one earring, so duplicate and mirror in your slicer or laser software when a shape is asymmetric.

## Laser Cutting

### Laser cutting



1. Engrave the pattern first at low power - on frosted or glitter acrylic, a light kiss-engrave looks etched-glass elegant.
2. Cut the outline and holes in one pass; small holes cut cleanest slightly slower than your outline speed.
3. Leave the masking on through both passes, then peel for flawless faces.
4. Open a jump ring sideways with two pliers, thread the blank and the hook, and close it flush.

## 3D Printing

### 3D printing



1. Print flat at 0.12 mm layers; at 2 mm thick a pair weighs a couple of grams and prints in minutes.
2. Patterns become subtle raised or recessed texture - silk filament exaggerates it beautifully.
3. Use a brim-free, well-leveled first layer; the first layer is the show face.
4. Assemble with jump rings exactly as with cut pairs.

## Make it yours

- Stack a patterned top arch over a solid drop in a contrasting color for two-tier statement pairs.
- Wood Grain pattern on real walnut plywood is a double-texture trick that always sells.
- Cut the same shape in three sizes for a graduated set: studs, mediums, statements.
- Frosted clear acrylic with the Ripple Waves pattern looks like sea glass.
- Make seasonal drops: clouds for spring, leaves for fall, octagons in metallic for the holidays.
- Use the bottom hole to hang tiny charms or beads below the blank.
- Mirror asymmetric shapes so left and right earrings face each other on the card.

---

Open the Earrings Generator: https://www.mylasertools.com/earrings-generator
Read online: https://www.mylasertools.com/learn/guides/earrings-generator